API 5CT J55 CASING

Pipes that belong to grade J55 have a minimum tensile strength that is lower while exhibiting properties similar to grade K55. Similar to most API specifications, the industry to benefit the most by using the API 5CT J55 Casing Tubing is natural gas, oil and petroleum industry. These pipes are used in the transportation of raw materials or products from one end to another.

The tubes under specification API 5CTQ J-55 are outfitted with varied end connections such as non-Upset ends or an External Upset End. the API 5CT Grade J55 Casing Pipe is considered to be a standard or a typical grade for tubes in systems that tend to be relatively shallow, say less than 9,000 ft. Moreover, these pipes are also well suited for applications in low-pressure environments where the pressure is less than 4,000 psi. Some suppliers recommend that the API 5CT J55 OCTG and Linepipe be either normalized across the full-length or the pipe could be treated to a combination of normalizing and tempering, after upsetting. These treatments performed on the Api 5ct J55 Oilfield Casing Pipe operates well, especially when used in applications that involve either carbon dioxide or sour service. Traditionally, pipes exposed to such conditions are prone to ringworm corrosion problems.  Nonetheless, the use of such type of heat treatments could raise the initial costs of the pipe.